Hardware facial rejuvenation is an effective modern method of rejuvenating the skin without plastic surgery. The use of hardware rejuvenation methods is recommended after 30 years. At the age of 30-40, they make it possible to overcome mimic wrinkles and skin fatigue. After 50 years, modern cosmetology equipment helps to remove deep wrinkles, ptosis, and wrinkles, making the skin more elastic and fresh.
Popular hardware rejuvenation techniques
There are many hardware rejuvenation techniques, they focus on different ages and skin conditions. Most often, clients want to rejuvenate the skin of the face, neck, and eyelids. Hardware cosmetology methods of facial rejuvenation can be divided into two main categories:
- Ablative. Take care not to violate the integrity of the patient's skin during the procedure.
- It is not ablative. During the procedure, the integrity of the patient's skin is not damaged.
Non-ablative methods are more careful, but in some cases the ablative method can be more effective in solving a specific age problem. The method must be chosen in consultation with the beautician.
Hardware facial rejuvenation procedures are performed with special equipment. The following tools are widely used:
- RF lifting devices.
- Ultrasound equipment (SMAS lifting equipment).
- ELOS device.
- Equipment for mesotherapy.
- Microdermabrasion tools.
- Cryotherapy devices, etc.
Some salons have so-called "beauty machines". Such multifunctional equipment can perform up to twenty different procedures.
RF-lifting as an effective rejuvenation method
One of the most popular modern methods of hardware facial rejuvenation is RF-lifting (radio-frequency lifting). It is an effective anti-aging technology that ensures the lifting and correction of the oval with the help of an RF-lifting device. This technique became popular in cosmetology about fifteen years ago.
The essence of the RF-lifting procedure is the effect of radio waves on the deep layers of the dermis and their heating. As a result of the heat, the tissues begin to shrink, the fibers contract. The result is an increase in skin tone and a pronounced lifting effect. In addition, the increased temperature stimulates the skin cells to produce natural collagen and elastin. New fibers appear, the skeleton characteristic of young skin is formed.
In addition to facial plastic surgery and eliminating laxity of the skin, RF-lifting helps to slow down the further development of wrinkles. The result obtained after the procedure lasts a maximum of 3 years.
Ultrasonic rejuvenation method - SMAS lifting
One of the characteristics of hardware rejuvenation methods performed with ultrasound equipment is their painlessness. The result of the procedure is increased cell regeneration, improved blood circulation, collagen synthesis, and removal of toxins and metabolic products from the body. Electric pulses tone the skin and provide a noticeable rejuvenation after just one treatment. Of course, the result may be different for different women, as it depends on the individual characteristics of the body and the condition of the skin.
SMAS lifting - lifting without surgery
SMAS lifting is the other most popular hardware rejuvenation technique that allows facelift to be performed without surgery and painful injections. The abbreviation SMAS stands for "lower muscular-aponeurotic layer - these are the muscles that form the framework of the face. As we age, these muscles stretch, causing the skin to sag and wrinkles to form. "
The plastic surgeon works with the lower muscle-aponeurotic layer. A SMAS device acts on it, which sends ultrasound pulses deep into the skin, "getting" to the muscles of the frame and tightening them. As a result, the skin looks younger and fresher, and all without surgical and invasive intervention.
ELOS rejuvenation
Hardware facial rejuvenation with ELOS technology is an effective and safe solution to combat age-related skin changes. The operating principle of ELOS equipment is based on the parallel operation of two types of energy - electric and light. As a result of these energies, they stimulate the production of natural collagen and elastin, thanks to which our skin gains tone and elasticity. The older the patient, the less collagen and elastin are produced in the skin, as a result of which the skin sags, thins, and wrinkles develop.
With the help of ELOS technology, beauticians start the natural processes of skin regeneration - they stimulate the synthesis of collagen and elastin. Undesirable processes related to aging slow down, wrinkles are smoothed out, rosacea, scars and age spots disappear.
Mesotherapy without injections
Modern methods of hardware facial rejuvenation make it possible to treat age-related skin changes without painful injections. With the help of modern mesotherapy equipment, it has become possible to deliver moisturizing substances into the deeper layers of the skin without the use of injections.
Non-injection mesotherapy is recommended to solve such aesthetic problems:
- The presence of wrinkles.
- Skin flaccidity.
- Hyperpigmentation.
- Couperose.
- Earthy skin tone.
- The presence of enlarged pores.
Microdermabrasion is a delicate method of hardware facial rejuvenation
Microdermabrasion or diamond resurfacing is a micro-resurfacing procedure that removes dead skin cells. In fact, the microdermabrasion machine allows deep exfoliation of the skin. To do this, use a diamond nozzle, on which crumbs of different grain sizes are applied.
What does diamond skin renewal provide? It balances relief and stimulates the restoration of natural tissues, which contributes to facial rejuvenation. The complexion is noticeably improved, the pores are narrowed, fine wrinkles are smoothed out, and the skin becomes more elastic. A procedure allows for the effect of skin restoration, and a complete microdermabrasion course helps to get rid of acne scars and hyperpigmentation.
Microdermabrasion is attractive because it is a painless procedure that does not require anesthesia and rehabilitation. The exposure time of the device, as well as the intensity, are selected individually, depending on the type and condition of the skin, as well as other individual characteristics. The process of hardware peeling is carefully checked by a beautician.
Cryotherapy is a way to slow down aging
Dosed facial skin cooling is an effective way to solve many age-related problems. This hardware rejuvenation technique helps to eliminate swelling, smooth out wrinkles, and get rid of age spots and scars. In addition, the use of the cryolipolysis device for rejuvenation helps to restore the oval of the face and improve the color of the skin.
During the procedure, liquid nitrogen is used to rejuvenate the face. The temperature of the liquid is -195 degrees. The liquid is delivered through a tank pipe, for which various nozzles are used. The cryotherapy procedure is not only effective, but also fast. A session lasts no more than ten minutes.
Indications and contraindications for hardware rejuvenation
The indication for hardware rejuvenation procedures can be just a woman or man's desire to look younger. However, experts recommend the use of such techniques for patients after 30 years. More specific indications of hardware rejuvenation include:
- Visible signs of skin aging.
- The presence of wrinkles on the eyes, lips, neck.
- The presence of age-related hyperpigmentation.
- Noticeable aging of the skin, loss of elasticity.
Like all aesthetic medicine procedures, rejuvenation with special devices has its own contraindications:
- Oncology.
- Pregnancy and breastfeeding.
- Low blood clotting.
- Skin fungus.
- Individual allergic reactions to substances injected into the skin (for example, in the case of mesotherapy).
Facial rejuvenation is a field of cosmetology that is developing very actively. Today it is a serious alternative to other rejuvenation methods - plastic surgery, injections and thread technologies. In contrast to the above methods of rejuvenation with cosmetology equipment, it allows you to make the skin younger and fresher without surgery and a difficult rehabilitation period.